Translate

**If you have previously subscribed to received my posts via email: Please subscribe to my posts via Bloglovin in the right sidebar.**

Thursday, October 26, 2017

Mail Art Friends reap #Cre8time Halloween Goodness


Hello everyone! I have a Halloween make to share today-- one that I was inspired to create. I haven't made any jewelry lately so I was excited and inspired by the theme and jumped at the chance to make some new Witch-worthy jewels for a "Witch's Cupboard" charm swap with some art friends hosted by Michelle Frae Cummings

I knew immediately that I wanted to create some glowing apple charms. I have an old apple pin that I found at a thrift store in my "TO MOLD" box that is a nice size and would be a nice pendant or charm made in resin... and with Halloween just around the corner, perhaps a POISON apple??!


I would normally break out the Amazing Mold Putty, but with the high gloss enameled surface and the fact that I wanted to make multiples -- I decided on using Amazing Remelt to create molds for my Cre8time Witchcraft!


Amazing Remelt is a Non Toxic, one-part reusable mold making material for room temperature or low exotherm materials. Amazing Remelt softens at 120˚F and becomes liquid at 135˚-140˚F. It can be remelted and reused to make new molds time and time again. This is ideal for making molds for smaller items such as jewelry, embellishments, and chocolate molds. YES, this stuff is FOOD-SAFE and it works great with chocolate and fondant!!


Before making a mold I need to add some tape to the backside so that the molding material won't flow through the hole where the stem touches the apple. I burnish the tape down really good with a bone folder to ensure good adhesion.


A couple criss-crossed recycled stir-sticks through the pin back will help suspend the original over a small silicone bowl that I will be using as a mold box.


Amazing Remelt is easy-to-use but you need to be patient. Amazing Remelt requires melting... the best way is in the microwave LOW and SLOW {CLICK HERE to view preparation}. It can be melted in the container it comes in, but for molding small items, I prefer using this cup fashioned with Amazing Mold Putty which I formed around the outside of a shot glass. I like this cup because it can be baked up to 375º F, is easier to pour from, and it helps keep the melted material from cooling off too fast.


I place the mounted apple over the top of a small silicone bowl then pour the melted Amazing Remelt over the top, completely covering surface of item. I stop for a brief moment after first coating, then repeat with a second layer. The overpour is collected in silicone bowl below which will be the mold box in the following steps.


After cooling off for a couple minutes, the Amazing Remelt hardens, and I have a skin layer which helps prevent air bubbles from getting trapped on surface of original.


I fill the bowl and flip the mounted pin with remelt skin layer over, then place face down into the liquid Amazing Remelt. After leveling it on the bowl, add more remelt to fill up to edge of suspended apple pin. Mold making doesn't always look pretty... it just needs to WORK! I set this in the refrigerator for about a 1/2 hour to cool and harden.


My little apple mold is hardened and ready to pop out of the bowl and demold.


I love how Amazing Remelt gives you the detail quality of Amazing Mold Rubber – and it's reuseable {you know how I love GREENcrafting}!!


I can make my charms, then melt the molds down and mold something else later. I don't have to store umpteen apple molds for eternity. I plan to make a few extra molds for FOOD USE ONLY to make some poison apple Halloween treats with chocolate melts. YES, this molding product is foodsafe and is perfect for chocolate and fondant.


With molds ready, it's time to fill with Amazing Clear Cast Resin colored with Alumilite Fluorescent Green Dye and Alumilite Phosphorescent Powder {an additive that glows in the dark}. CLICK HERE to view mixing and preparation.


I mix up the resin and set aside to rest for about 15-20 minutes so the resin can COOL and DEGAS {letting the air bubbles escape}.

 

 The addition of phosphorescent powder makes magic in the dark.


Most of my time making these charms was spent on mold preparation. I made 16 molds which took me a a couple hours one morning plus a whole entire day. Making one mold takes about a 1/2 an hour... the time consuming part is melting the Amazing Remelt slowly and then waiting for it to harden to demold the original. 

Before pouring resin, I gently cut a slice in each mold where I suspend a headpin with two glass beads {these will be embedded in the resin}. I will use this to form a loop at the top to affix beads and a jump ring for hanging on a chain. With a tiny brush, I added a bit of color to the leaf and stem using Alumidust.


I gently pour resin, guiding it with a stir stick to fill each mold. I cover the tray and set aside to cure overnight.


VOILA... my apples are cured and are ready to embellish! I decided to use a glass leaf bead, so I bent and broke off the leaf of each resin apple. I gave each a light and quick sanding around edges with an emory board, then I finished each charm with 2 wire-wrapped beaded danglies placed onto the embedded headpin. I close headpin off and form a loop for a jumpring... these gorgeous glowing apples are complete.


How charming is the glowing green apple?!


After making the green apples... I couldn't stop there! I took this idea further by altering the original, then remolding/casting to make a glowing resin POISON apple! This right is a one-of-a-kind, but if anyone would love a custom pendant, I will entertain custom orders for with drips in your favorite color.

Here is mine with an accompanying ATC {artist trading card} as part of swap rules.




"Dip the apple in the brew,
let the Sleeping Death seep through..."


Here are the ghoulishly glam charms made by all the players. I'm going to have fun dressing these up into finished pieces and having SpOoKy jewels to wear for the coming weeks up to Halloween. CLICK on NAME to pop over to a tutorial {if available}.







Kathleen Sites






Ashani



P.J. Waldrop



Carol Hoffman

Thank you ladies for participating in this swap and for your beautiful work and craftsmanship. I look forward to joining in another for the holidays {ideas for themes are being tossed about}. 

I may have one or two Halloween makes up my sleeve before month's end. Thanks for dropping by and Happy Creating! :)  Sb



1 comment:

I would love to hear your thoughts and comments...

Blog Widget by LinkWithin