Translate

**If you have previously subscribed to received my posts via feedburner or Bloglovin, those are inactive now. To receive my creative updates, please subscribe in the right sidebar.**

Tuesday, August 20, 2013

I'm GELLIN'... I'm GELLIN' and I totally made it MYSELF!!!!



Hello everyone! I'm happy to report I've FINALLY crossed off something on my creative "bucket list" – try out Gelatin Plate monoprinting! In the process of playing with a new product, I've created an AMAZING DIY No-Gelatin Printing Plate too! There are loads of DIY tutorials online on how to make one of these with Knox Gelatin, but I did some experimenting and give this a try using the new Amazing Mold Rubber! Today I'm sharing my results – ENJOY :)



Amazing Mold Rubber is an easy to use, high strength liquid silicone mold making rubber that is strong, soft and flexible - great for undercut parts and cures in approx. four hours {I timed it for this project - it is 4 hours... YAY}. Amazing Mold Rubber is a two-part liquid rubber used to make extremely elastic molds to produce quick and exact reproductions of your original. Replicas can then be cast in Amazing Casting Resin, Amazing Clear Cast Resin for plastic parts - or use other materials such as plaster, wax, clay or polyester... and that's just the beginning to all the fabulous uses just waiting to be discovered!


After four hours my Amazing Mold Rubber was fully cured and my AMAZING DIY No-Gelatin Rubber Plate was ready for a joyride! This second video is a test run on my faux gelatin plate... and my FIRST TRY at Gellin'...



Isn't this totally AMAZING!!! Now I have two plates in different sizes {one 6" x 7" and the other is 3" x 4"} that I can use simultaneously for double the mixed-media fun! I can totally see how this can become addictive. Here is my first three-paint layer monoprint and I can't wait to make more.


Now that I've got my hands on another brayer, I'm ready to rock n' roll. One brayer to paint with and the other to roll my impressions.

Why an ATC size plate? For my ARTful Lunch... I'm packing a daily ARTful lunchbox of creative playtoys to make a daily ATC while I'm at work. CLICK HERE to read post.

***********************

ATC No. 1
***********************

I created about 4 or 5 papers using my homemade no-gelatin rubber plate. I overstamped down the side with a handcarved stamp that I made in highschool out of a pink eraser. The silhouette man with dog is from Viva Las VegaStamps! on top of a torn washi tape boardwalk. I added some ( ) and numbers with plastic letter stencils leftover from my summer art camp supplies and blotted before the marker dried to mute the tones.

Thanks for dropping by. Hope you are having a great day! Sb :)

Please take a moment to subscribe to my posts via email or bloglovin' in the right sidebar since google reader/friend connect will be gone any minute now.

Sunday, August 18, 2013

Let Your Creativity Soar with Anything But a Card Challenges No. 26 - Fairy Tales or Fairy Theme


Please take a moment to subscribe to my posts via email or bloglovin' in the right sidebar since google reader/friend connect will be gone any minute now.

Hello! Happy Sunday everyone! I'm so excited to share the new Anything But a Card Challenge... Anything But a Card Challenge 26 is "Fairy Tales or Fairy Theme" - let your imagination soar with this theme... you could create something based on any fairy tale, or fairies, room for lots of possibilities! Let your imagination soar!

I am all about green-crafting! To create proper home for my fairy, I have taken a cigar box lid and some other bits and baubles to transform it into a shadow box straight from Fairyland! I've included a little how-to below on how I've created my "Fairy Frozen Charlotte", too.


**JUST FOR FUN** Here's an idea starter... if you want to channel your own inner Fairy... there is even a Fairy Name Generator. CLICK HERE to generate your very own Fairy, complete with a backstory. Next week I will share a project using one of these generated Fairy names. Just remember create anything except a card... and to have FUN!!!



There's two weeks to play along and link up via inlinkz froggy. Anything But a Card Challenges is a bi-weekly challenge and today, begins a new challenge. Our wonderful Design Team showcases their Challenge 26 "Fairy Tales or Fairy Themed" inspired projects today. Please click here to head on over to ABAC and see the wonderful projects shared by the design team AND submissions by all of you.

REMEMBER this challenge blog is ANYTHING and EVERYTHING... except for Cards. ATC's aren't greeting cards...so please link up your ATC's, too!!!


This project began with a little goodie that was included from an Etsy team-member I purchased some holiday soap molds from. She included this sweet fairy bar of molded goat's milk soap. I have been saving this for a special Amazing Mold Putty adventure... that has evolved into a whole fairyland altered shadowbox project.


I mixed up a good amount of Amazing Mold Putty to cover the front and all sides of the soap. It's about the size of a trading card and the square part of the soap below the relief is about 1/2" thick. I made the mold around the bar and I can use it for just the relief of the fairy - or as more of a sculptural piece.

A little note about the results... as it turns out goat's milk soap is very soft and delicate {but smells lovely}. It wasn't harmed by the mold putty - but the heat of the curing process of the mold putty sort of melted the soap into the edges of it. I had to put it in the freezer for about an hour {because this particular mold is so thick} to help accelerate cooling and release from mold putty. I had to pull a little to get it started, but it worked! My bar of soap has a slight tint of yellow now, but it was a success!




Then I filled the relief part of the mold with Creative Paperclay® and let completely dry. I also put this into the freezer for about 15 minutes so that I could get it out of the mold to dry. When dry I used a water brush to add some muted tones with my Distress Markers and then rubbed the edges and high points with metallic pearlescent dew drop ink pads.

My little fairy frozen charlotte is born!


The lovely detail of my Fairy Frozen Charlotte is painted, worn and weathered.


The Gnome is a vintage collage image from AlteredPages.com and is nestled amongst money shred for grass; layered on top of some patterned and handmade paper scraps, with some chipboard flower stickers and flourishes, paper florals and silk flower leaves I found in the parking lot outside the craftstore. All tied off at the top with a beautiful bow of luscious May Arts Ribbon.


For more projects, ideas and techniques using Amazing Crafting Products, jump over to the Amazing Mold Putty Blog. Go run and get those fairy wings on and let your creativity soar!

Thanks for dropping by today and I hope to see you tomorrow for a sneak peek from  a new project I've created with Amazing Crafting Products. :) Sb

Tuesday, August 13, 2013

Dolls Love a Bubble Bath too! Day TWO of Viva Las VegaStamps! and Scor-Pal Inspiration Week



Hello - welcome to day two of the Scor-Pal and Viva Las VegaStamps! rubber stamps week of inspiration!  Today I have a special project in store. I've created a paper dollhouse powder room, complete with faux ceramic tile, hand doodled vellum shower curtain and a girly bubble bath. 

This little dollhouse scene was totally inspired by two of the amazing tutorials over at the Scor-Pal website {a tile card by Susan Caplan and the "happy place" card by Cary Eldred}. I have this adorable tub stamp and I couldn't help but pay homage to both of these creative ladies cards - combining some elements from each, and housing it in some quick and easy box techniques provided there as well. I usually measure and score my own boxes and such using my paper trimmer - NO MAS! I'm a Scor-Pal girl now.

 


What does one do on a rainy day??? Play with dolls! I have been busy stamping and scoring up rooms for my neices' dolls. I have scored Kromecote cardstock and vellum hand doodled with Sakura Souffle® 3-D Opaque Ink pens.


This posh powder room has the look of real tiles {but it's only paper} to showcase this adorable bath tub stamp #5508. I've adhered the scored and folded walls edging and details with Miracle Tape from VLVS!, too!



I'm all about the details and I had so much fun customizing this little room all out of paper using my Scor-Pal.


I hand stamped, embossed with VLVS! High Gloss Embossing Powder,then hand colored the tub using Sakura of America Gelly Stardust Pens. I fussy cut and set aside.


I hand doodled a sheet of vellum and scored
at 1/4" intervals then accordion folded.


Detail of my hand coloring using


I pinched accordion together and punched
a hole to suspend curtain on a wire.


I scored and rolled over edging secured with Miracle Tape.


 I set an eyelet to accept wire to suspend curtain.


Curtain suspended from wire.


Detail view from top.



The faux tile is Kromecote cardstock scored on the Scor-Pal and swiped with a pale blue ink. Looks so realistic and it was so quick and easy to make. The details are what makes handmade goodies like this so special. My niece is sure to enjoy playing with this.

CLICK HERE to jump on over to the
VLVS! Blog to see MORE of what's in store today. 

ALSO there's blog candy to be won along with a "just because" sale, too! Get 20% off STOREWIDE through the 15th. use coupon code { aug20 } in your cart!


Thanks for visiting! Have a wonderfully creative day :) Sb